This is awesome.  And I can’t believe how simple it is.  Using a 16 oz. paper or styrene coffee cup (NO PLASTIC!  Sharp edges!), you can easily put the insert of your choice in your TeddyBabe *and* provide some protection against fluids.  NO MORE FRUSTRATING STRUGGLING! The cup is cut as shown, then inserted.  It holds position well and provides some ‘grip’ to keep the insert in place. Removal is easy; pop out the insert, then pop out the cup. You can probably figure out how I did this just by looking at the photos (click on each image for a larger version.  However, I’ll put some notes in as necessary to help explain.

…………………

In order to gauge the TB pussy depth I used the handle of a flashlight to help me get a sense of how far a round object could be inserted.   Figure the depth (for this diameter object) to be 6 inches.

Items required.  Including two inserts (shown).  That black thing is a long flashlight.  It works well for judging depth.  I used the tape to keep the measuring tape affixed to the very end edge of the flashlight handle.

A single “V-shap” cut is made in the cup.  Notice that I have not cut all the way to the base; this provides a ‘catch cup’ effect.  While certainly not waterproof, this will help keep fluids under control.

The cup is then compressed around the sleeve and inserted into the pussy. The cup provides enough rigidity to allow you to press on the top edge of the cup and get the sleeve in as deep as possible.

Sleeve is now inserted.  Note that it sticks out a little.  This is a Good Thing.  If the sleeve goes back flush with the pussy opening, she becomes harder to penetrate in missionary position, and applying lube can more easily result in lube getting on her ’skin’. Of course, you can set the depth to anything that makes you happy. You can also cut the insert shorter if you want it in deeper.

Same deal with the taller sleeve.

A Fistfull of Pussy

This particular sleeve is great to have sticking out a little.  Reason is that now you can flex the sleeve opening to ‘come up and meet you’ at whatever entry angle works for you.  Essentially, this is a perfect simulation of how a woman can rotate her hips to help her vagina ‘meet you’ at the easiest angle for entry.

Here’s what it looks like pushed in just a little farther.  By the way, this sleeve ROCKS!

Sleeve removed.

So…….

A review of the items but I want you to notice something.  The cup is shown here *after* installation and removal.  Now, admittedly, it wasn’t field tested, but you can see that very little crushing occurs during the installation process.  That should tell you that you can rely on the cup to go up inside her dependably. Also, that longer sleeve needs to be shortened for the CandyGirl.  For the TeddyBabe I think it’s fine at current length but would probably be good shortened too.  However, I like it sticking out a little to help with initiating sex.